Necklace Instructions:
1. Use the all-purpose adhesive to glue Bead Caps to each of the Blue Acrylic Drops. Set aside to dry.
2. Cut the following segments from the Necklace Chains: 12”, 14” and 17”.
3. Use a Necklace Chain link to attach each segment to the trio of loops of the Flower Connector. Repeat with the other ends of the segments.
4. Cut two 1.5” segments from the spare chain left over from Step 2. Use a chain link to attach each segment to the single loop of each of the Flower Connectors. Attach a Lobster Clasp to one segment and the large ring to the other.
5. Use a jump ring to attach each Small Blue Acrylic Drop to the shortest length chain, starting from the center and moving outward leaving ¼” in between each drop.
6. Attach 11 Medium Blue Acrylic Drops to the middle chain, starting from the center and moving outward, leaving ½” in between each drop. Add 6 Small Blue Acrylic Drops to each side of the Medium Drops.
7. Attach 9 Large Blue Acrylic Drops to the middle chain, starting from the center and moving outward, leaving ½” in between each drop. Add 6 Small Blue Acrylic Drops to each side of the Medium Drops.

Necklace Materials:
45 – Small Blue Acrylic Drops BM16060
19 – Medium Blue Acrylic Drops BM16060
9 – Large Blue Acrylic Drops BM16060
3 – Gold 18” Necklace Chain BM15928
2 – Gold Flower Connectors BM16206
73 – Gold Bell Bead Caps BM16086
73 – Gold 4mm Jump Rings

Earrings Instructions:
1. Use all-purpose adhesive to glue a Bell Cap to each Blue Acrylic Drop. Set aside to dry.
2. Attach a jump ring to each Drop.
3. For each earring, connect 10 jump rings to each other in a continuous chain and attach the first jump ring to an ear wire.

Earrings Materials:
10 – Small Blue Acrylic Drops BM16060
10 – Gold Bell Bead Caps BM16086
20 – Gold 4mm Jump Rings
2 – Gold Ear Wires

TOOLS:
All-purpose adhesive
Wire cutters
Chain nose pliers