Catalogs FAQ



Difficulty Level
Share |
Royal Boheme™ Purple Bib Necklace

Instructions:

Purple Round Bead and Enameled Pendant Necklace

INSTRUCTIONS:
1. Create a dangle by sliding 1-Silver 4mm Round Bead onto 1-head pin and forming a simple loop. Attach dangle to bottom loop of Teardrop Connector.
2. Attach oval jump ring to top loop of Teardrop Connector.
3. Cut a 4 inch 22 gauge wire and make a rolled loop on one end with 2–3 coils, then slide on 1-Silver 4mm Round Bead, 14-Purple 6mm Round Glass Beads and 1-Silver 4mm Round Bead.
4. Bend this beaded piece into a loop and make a rolled loop on end with 2–3 coils.
5. Cut an 8 inch 22 gauge wire and bend into a loop.
6. Slide Teardrop dangle to center of wire, then add 1-Purple 6mm Round Glass Bead on each side of dangle. Pass wire ends through small beaded part loops.
7. Slide 13-Purple 6mm Round Glass Beads and 1-Silver 4mm Round Bead onto each side of big wire loop and make rolled loops.
8. Separate circles of 2-Purple Pendants by opening connecting jump rings (small circles will be used to make earrings).
9. Cut a 24 inch tiger tail, then string 2-Silver 4mm Round Beads in center and pass tiger tail through upper double loop of 1-Purple Three-Circle Pendant.
10. Add 2-Purple 6mm Round Glass beads onto each tiger tail and pass both ends through rolled loops of beaded fragment from previous steps.
11. String necklace components onto one tiger tail end in the following order:
6-Purple 6mm Round Glass Beads, 2-Silver 4mm Round Beads, pass end through upper double loop of large separated pendant circle, 7-Purple 6mm Round Glass beads, 1-Silver 4mm Round Bead, pass tiger tail through upper loop of medium separated pendant circle, 1-Silver 4mm Round Bead, 6-Purple 6mm Round Glass beads, 1-Silver 4mm Round Bead.
12. Repeat step 11 for other side of necklace.
13. Cut a 36 inch tiger tail, then pass through bottom loop of 2nd circle of central Purple Three-Circle Pendant, placing it in center of tiger tail.
14. String components onto tiger tail on one side in the following order:
2-Silver 4mm Round Beads, 18-Purple 6mm Round Glass Beads, 1-Silver 4mm Round Bead, pass tiger tail through bottom loop of large separated pendant circle, 1-Silver 4mm Round Bead, 12-Purple 6mm Round Glass Beads, 1-Silver 4mm Round Bead, pass tiger tail through bottom loop of medium separated pendant circle, 1-Silver 4mm Round Bead, 11-Purple 6mm Round Glass Beads, 1-Silver 4mm Round Bead.
15. Repeat step 14 for other end of tiger tail.
16. String 8-Purple 6mm Round Glass Beads and 1-Silver 4mm Round Bead onto both tiger tail ends together (on both sides of necklace), then attach lobster clasp using crimping technique.

MATERIALS:
3-Purple Three-Circle Pendants BM18374
33-Silver 4mm Round Beads BM18200
1-Antique Silver Teardrop Connector BM18353
3 pkg-Purple 6mm Round Glass Beads BM18143
1-Silver Lobster Clasp
1-Silver Head Pin
1-Silver Oval Jump Ring
60 inches-Silver Tiger Tail
12 inches-22 Gauge Silver Wire
Purple Earrings

*******************

EARRING INSTRUCTIONS:
1. Create a connector by sliding 1-Purple 6mm Round Glass Bead onto 1-eye pin and forming a simple loop.
2. Attach this connector to small Purple Pendant circle on one end and to bottom loop of 1-Teardrop Connector on the other.
3. Create 2nd connector by sliding 1-Silver 4mm Round Bead onto 1-eye pin and forming a simple loop.
4. Attach 2nd connector to earwire loop on one end and to top loop of Teardrop Connector on the other.
5. Repeat steps 1–4 to create 2nd earring.

MATERIALS:
2-Purple Three-Circle Pendants BM18374
2-Purple 6mm Round Glass Beads BM18143
2-Antique Silver Teardrop Connectors BM18353
2-Silver 4mm Round Beads BM18200
4-Silver Eye Pins
2-Silver Earwires



PRODUCTS USED