Catalogs FAQ



Difficulty Level
Share |
Royal Boheme™ Purple Multi-Strand Necklace and Earrings

Instructions:

Purple Necklace

Necklace shortest strand length is 17 inches

INSTRUCTIONS:
1. Cut a 3 inch silver wire, then create a rolled loop on one side with 2–3 coils. Slide 1-Natural 1 inch Long Bone Bead onto this eye pin, then create a wrapped loop above.
2. Repeat step 1 six times.
3. Cut a 24 inch tiger tail, then attach one end to outer loop of 5-loop clasp using crimping technique, then string components in the following order:
21-Purple Glass Small Oval Beads, (1-Natural 1 inch Long Bone Bead dangle, 2-Purple Glass Small Oval Beads) x 7, 19-Purple Glass Small Oval Beads.
4. Attach tiger tail end to outer loop of the other 5-loop clasp part using crimping technique.
5. To create 2nd necklace strand, cut a 19½ inch black nickel chain and attach ending links to the next clasp loops by opening and then closing the links.
6. Cut a 32 inch tiger tail, then attach one end to middle loop of 5-loop clasp using crimping technique, then string components in the following order:
30-Purple Glass Small Oval Beads, 1-Natural 1 inch Long Bone Bead, 6-Purple Glass Small Oval Beads, 1-Natural 1 inch Long Bone Bead, 15-Purple Glass Small Oval Beads, 1-Natural 1 inch Long Bone Bead, 6-Purple Glass Small Oval Beads, 1-Natural 1 inch Long Bone Bead, 23-Purple Glass Small Oval Beads.
7. Attach tiger tail end to middle loop of the other 5-loop clasp part using crimping technique.
8. Cut three 2 inch lengths of black nickel chain and one 8 inch length.
9. Attach one end of 8 inch chain to last clasp loop on one side and to 1-Black Nickel Round Connector on the other by opening and then closing the links.
10. Alternately attach three 2 inch chains and 2-Round Connectors.
11. Repeat steps 8–10 to create 2nd part of longest strand.
12. Attach Purple Sequined Pendant to chain ends using 2-jump rings.
13. Cut a 6 inch silver wire, then create a rolled loop on one side with 2–3 coils. Slide 1-Purple 3 inch Long Bone Bead onto this eye pin, then create a wrapped loop, ensuring that this dangle is connected to bottom loop of Sequined Pendant before closing loop.
14. Repeat step 13 six times to create a dangle for each bottom loop of Pendant.

MATERIALS:
1-Purple Sequined Pendant BM18235
11-Natural 1 inch Long Bone Beads BM18160
9-Black Nickel Round Connectors BM18359
7-Purple 3 inch Long Bone Beads BM18153
2 pkg-Purple Glass Small Oval Beads BM18140
6-Antique Silver Crimp Beads
3-Antique Silver Head Pins
2-Black Nickel 6mm Jump Rings
1-Antique Silver 5-Loop Clasp
90 inches-Silver Tiger Tail
56 inches-22 Gauge Silver Wire
48 inches-Black Nickel Chain

******************************

Purple and Natural Bead Earrings

INSTRUCTIONS:
1. Cut a 3 inch 22 gauge wire, then create a rolled loop on one side with 2–3 coils. Slide 1-Natural 1 inch Long Bone Bead onto this eye pin, then create a wrapped loop above.
2. Repeat step 1 two times.
3. Cut a 12 inch 26 gauge wire, then slide components to center in the following order:
(1-Purple Glass Small Oval Bead, 1-Natural 1 inch Long Bone Bead dangle) x 3, 1-Purple Glass Small Oval Bead.
4. Pass wire ends through 1-Natural 1 inch Long Bone Bead in opposite directions.
5. Repeat step 4 two times, making 3-Natural 1 inch Long Bone Bead fragments.
6. Slide 2-Purple Glass Small Oval Beads onto each wire end.
7. Twist wires and create a wrapped loop, ensuring that earring is attached to earwire before closing loop.
8. Repeat steps 1–7 to create 2nd earring.

MATERIALS:
16-Purple Glass Small Oval Beads BM18140
12-Natural 1 inch Long Bone Beads BM18160
2-Black Nickel Earwires
24 inches-26 Gauge Silver Wire
18 inches-22 Gauge Silver Wire



PRODUCTS USED