1. Cut an 18-inch length of Tiger Tail, then attach one end to a Medium Oval Jump Ring using crimping technique.
2. String 35-Black Round 10mm Pearl Beads onto Tiger Tail and attach end to Mesh Leaf Connector loop (next to leaf stem) using crimping technique.
3. Create a connector by sliding a Gray Round Glass 6mm Pearl Bead onto an eye pin and forming a simple loop. Repeat 13 times.
4. Join all 14-Gray Pearl connectors into a beaded chain, then attach 1st connector to right loop of Cameo Pendant and last connector to tip of Mesh Leaf Connector.
5. Cut a 7-inch length of Oval and Round Link Chain, then cut a 7½-inch length of Fine Chain.
6. Attach both chains together to right loop of Cameo Pendant (same loop as Gray Pearl connectors) and to Mesh Leaf Connector (next loop after Gray Pearl connectors) using Jump Rings.
NOTE: Use one Jump Ring to attach both chain ends.
7. Create a connector by sliding a Black Faceted Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 17 times.
8. Join all 18-Black Cathedral Bead connectors into a beaded chain, then attach 1st connector to right side of Cameo Pendant just below Gray Pearl connectors using a Jump Ring and last connector to Mesh Leaf Connector loop after attached chains.
9. Cut an 8½-inch length of Nickel Oval and Round Link Chain, then cut a 9-inch length of Fine Chain.
10. Attach both chains together to right side of Cameo Pendant just below Black Cathedral Bead connectors and to Mesh Leaf Connector loop using Jump Rings.
11. Create a connector by sliding a Red Faceted Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 20 times.
12. Join all 21-Red Cathedral Bead connectors into a beaded chain, then attach 1st connector to bottom loop of Cameo Pendant and last connector to Mesh Leaf Connector loop after attached chains.
13. Cut a 10-inch length of Oval and Round Link Chain, then cut a 10½-inch length of Fine Chain.
14. Attach both chains together to left side of Cameo Pendant just below loop and to Mesh Leaf Connector loop using Jump Rings.
15. Create a connector by sliding a Black 10mm Round Pearl Bead onto an eye pin and forming a simple loop. Repeat 18 times.
16. Join all 19-Black Pearl connectors into a beaded chain, then attach 1st connector to left loop of Cameo Pendant and last connector to Mesh Leaf Connector loop.
17. Attach Toggle Clasp to top loop of Cameo Pendant using 2-Jump Rings.
18. Attach Toggle Clasp bar to Jump Ring from step 1 attached to beaded strand using another Jump Ring.

-------------------------------

MATERIALS CHECKLIST:
1 – Black Nickel Cameo Pendant BM19263
1 – Black Metal Mesh Leaf Connector BM19313
54 – Black Round 10mm Pearl Beads BM19174
21 – Red Faceted Glass 6mm Cathedral Beads BM19182
18 – Black Faceted Glass 6mm Cathedral Beads BM19179
14 – Gray Round Glass 6mm Pearl Beads BM19177
11 – Black Nickel Medium Oval Jump Rings BM19214
1 – Black Nickel Toggle Clasp BM19214
28 in. – Black Nickel Fine Chain BM19192
24½ in. – Black Nickel Oval and Round Link Chain BM19187
18 in. – Tiger Tail BM19214
72 – Black Nickel Eye Pins
2 – Black Nickel Crimp Beads