Catalogs FAQ



Difficulty Level
Share |
Orient Express™ Antique Brass and Ceramic Bead Necklace and Earring Set

Instructions:

Necklace Materials:
1 – Antique Brass Pagoda Connector BM19775
6 – White/Blue Diamond Shape Ceramic Beads BM19608
8 – Black 6mm Round Acrylic Beads BM19608
1 – Antique Brass Decorative Toggle Clasp BM19747
14½ in. – Antique Brass Large Rolo Chain BM19670
15 – Antique Brass Eye Pins
5 – Antique Brass 7mm Jump Rings
1 – Antique Brass Bead Cone
12½ in. – Antique Brass Fine Chain

Necklace Instructions (28-inch length):
1. Create a connector by sliding a White/Blue Diamond Bead onto an eye pin and forming a simple loop. Repeat 5 times.
2. Create a connector by sliding a Black 6mm Round Acrylic Bead onto an eye pin and forming a simple loop. Repeat 7 times.
NOTE: Black 6mm Round Acrylic Beads included as spacers in White/Blue Diamond Bead package.
3. Join all 14-connectors into a beaded chain, alternating two types of connectors.
4. Attach Toggle Clasp bar to one end of beaded chain using one more Black 6mm Round Bead connector.
5. Attach other end of beaded chain to bottom of Pagoda Connector using a 7mm jump ring.
6. Cut a 14½-inch length of Large Rolo Chain, then attach one end to Toggle Clasp using 2-jump rings and other end to top loop of Pagoda Connector using 2-jump rings.
7. Cut 3-inch, 2¾-inch, 2½-inch, 2¼-inch and 2-inch lengths of fine chain.
8. Open an eye pin loop and slide on all 5-chains, then close loop.
9. Slide bead cone onto eye pin for a big simple loop, then attach this chain tassel to bottom of Pagoda Connector.

Earring Materials:
2 – White/Blue Diamond Shape Ceramic Beads BM19608
8 – Black 6mm Round Acrylic Beads BM19608
2 – Antique Brass Earwires BM19730
6 – Antique Brass Eye Pins
2 – Antique Brass Bead Cones
25 in. – Antique Brass Fine Chain

Earring Instructions:
1. Create a connector by sliding a White/Blue Diamond Bead onto an eye pin and forming a simple loop.
2. Create a connector by sliding a Black 6mm Round Acrylic Bead onto an eye pin and forming a simple loop.
3. Join 2-connectors together.
4. Cut 3-inch, 2¾-inch, 2½-inch, 2¼-inch and 2-inch lengths of fine chain.
5. Open an eye pin loop and slide on all 5-chains, then close loop.
6. Slide a bead cone onto eye pin and form a simple loop, then attach this tassel to available loop of White/Blue Diamond Bead connector.
7. Attach an earwire to available loop of Black Round Bead connector.
8. Repeat steps 1–7 to create 2nd earring.



PRODUCTS USED 

1 – Antique Brass Pagoda Connector BM19775 6 – White/Blue Diamond Shape Ceramic Beads BM19608 8 – Black 6mm Round Acrylic Beads BM19608 1 – Antique Brass Decorative Toggle Clasp BM19747 14½ in. – Antique Brass Large Rolo Chain BM19670 15 – Antique Brass Eye Pins 5 – Antique Brass 7mm Jump Rings 1 – Antique Brass Bead Cone 12½ in. – Antique Brass Fine Chain 2 – White/Blue Diamond Shape Ceramic Beads BM19608 8 – Black 6mm Round Acrylic Beads BM19608 2 – Antique Brass Earwires BM19730 6 – Antique Brass Eye Pins 2 – Antique Brass Bead Cones 25 in. – Antique Brass Fine Chain