1. Cut two 3-inch lengths of black 26 gauge wire.
2. Attach Black Nickel Stone Pendant to top of a Filigree Connector using 3-inch wires. Pass wires through Stone Pendant loops and twist behind.
3. Create a connector by sliding a Black Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 25 times.
4. Join 5-Filigree Connectors on top using 4-Cathedral Bead connectors.
5. Join same Filigree Connectors on bottom using 2-Cathedral Bead connectors attached with 4mm jump rings.
6. Attach Pendant part from step 2 to middle Filigree Connector using 2-jump rings.
7. Create 2-beaded chains by joining together 7-Cathedral Bead connectors from step 3.
8. Attach one end of each beaded chain to lobster clasp and other end to top of necklace outer Filigree Connectors.
9. Create a dangle by sliding a Black Glass 6mm Cathedral Bead and a bead cap onto a head pin and forming a simple loop. Repeat 2 times.
10. Attach 2-dangles to bottom side loops of central Filigree Connector and one to Stone Pendant bottom loop as shown.
---------------------------
MATERIALS CHECKLIST:
1 – Black Nickel Stone Pendant BM19212
6 – Oxidized Silver Filigree Connectors BM19308
29 – Black Glass 6mm Cathedral Beads BM19179
26 – Antique Silver Eye Pins
6 – Silver 4mm Jump Rings
3 – Antique Silver Bead Caps
3 – Antique Silver Head Pins
1 – Antique Silver Lobster Clasp
6 in. – Black 26 Gauge Wire