NECKLACE INSTRUCTIONS:
1. Attach Portrait Pendant to Antique Silver Scroll Connector using 5-inch silver 26 gauge wire.
2. Attach top loops of Scroll Connector to bottom center of Tan Lace Necklace using 2-Antique Gold Oval Jump Rings.
3. Create a dangle by sliding a Black Glass 6mm Cathedral Bead onto a head pin and forming a simple loop. Repeat 4 times.
4. Create a connector by sliding a Black Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 4 times.
5. Attach a dangle to 2nd loop away from Scroll Connector along bottom of Lace Necklace.
6. Attach a bead connector to a dangle, then attach to 2nd loop away from 1st dangle along bottom of Lace Necklace.
7. Attach a 2-bead connector to a dangle, then attach to 2nd loop away from 1st bead connector with dangle along bottom of Lace Necklace.
8. Attach a bead connector to a dangle, then attach to 2nd loop away from 2-bead connector with dangle along bottom of Lace Necklace.
9. Attach a dangle to 2nd loop away from 2nd bead connector with dangle along bottom of Lace Necklace.
10. Repeat steps 3–9 for other side of necklace as shown.
11. Create a connector by sliding a Black Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 11 times. Make 2-beaded chains using 6-connectors each.
12. Attach one end of each 6-bead chain to side loops of Scroll Connector.
13. Attach other ends of 6-bead chains to Gold Oval Connector loop using a gold 4mm jump ring.
14. Create a dangle by sliding a Black Glass 6mm Cathedral Bead onto a head pin and forming a simple loop.
15. Attach this dangle to bottom loop of Gold Oval Connector from previous step.
16. Join 5-Gold Oval Connectors together using 2-gold 4mm jump rings for every connection.
17. Attach one end of this strand to side loop of Scroll Connector using an Antique Gold Oval Jump Ring.
18. Attach other end of Gold Oval Connector strand 1½ inch away from last Black Glass 6mm Cathedral Bead dangle using an Antique Gold Oval Jump Ring.
19. Repeat steps 16–18 for other side of necklace.
---------------------------
MATERIALS CHECKLIST:
1 – Portrait Pendant BM19290
1 – Antique Silver Scroll Connector BM19282
1 – Tan Lace Necklace BM19310
31 – Black Glass 6mm Cathedral Beads BM19179
11 – Gold Oval Connectors BM19242
6 – Antique Gold Oval Jump Rings BM19215
1 – Antique Gold Toggle Clasp BM19215
24 – Gold 4mm Jump Rings
18 – Gold Eye Pins
11 – Gold Head Pins
5 in. – Silver 26 Gauge Wire

---------------------------
BRACELET INSTRUCTIONS:
1. Create a connector by sliding a Black Glass 6mm Cathedral Bead onto an eye pin and forming a simple loop. Repeat 6 times.
2. Join 6-Gold Oval Connectors with 7-Cathedral Bead connectors.
3. Attach 1st and last Cathedral Bead connectors to toggle clasp.
4. Create a dangle by sliding a Black Glass 6mm Cathedral Bead onto a head pin and forming a simple loop. Repeat 4 times.
5. Attach 5-dangles to 5-Gold Stick Connectors.
6. Attach all 5-long dangles to toggle clasp loop using 5-jump rings, connecting them one by one.
---------------------------
MATERIALS CHECKLIST:
1 strand – Gold Oval and Stick Connectors BM19242
12 – Black Glass 6mm Cathedral Beads BM19179
5 – Gold 4mm Jump Rings
5 – Gold Head Pins
7 – Gold Eye Pins
1 – Antique Gold Toggle Clasp