Catalogs FAQ



Difficulty Level
Share |
Lost & Found™ Fleur De Lis Necklace

Instructions:

1.Cut 24” length of Silver Tiger Tail and attach one side to the inner loop of the Multi-Strand Clasp using the crimping technique.

2.String 40-8mm White Glass Pearls onto tiger tail. Attach the end of the beaded strand to second side of the Multi-Strand Claps using the crimping technique.

3.Cut another 24” length of Silver Tiger Tail and attach to the middle loop of the Multi-Strand Clasp using the crimping technique.

4.String 44-8mm Gray Glass Pearls onto the tiger tail. Attach the end of the beaded strand to second side of the Multi-Strand Claps using the crimping technique.

5.Cut 1-18” piece of Antique Silver Small Link Chain and attach the ends of the of the chain to the outer loops of the Multi-Strand Clasp with 4mm Jump Rings and the jump ring technique.

6.Attach the Fleur De Lis Pendant to the middle of chain with 1-4mm Jump Ring.

7.Create 5 Beaded Chains. Connect 6mm & 8mm Black Faceted Connectors into a beaded chain by opening bead loops with pliers and closing after connection in the following order: 2-6mm beads, 3-8mm beads and 2-6mm beads. Repeat this sequence 4 more times.

8.Attach the 5 Beaded Chains from Step 7 to 2-Black Acrylic Rose Connectors as shown.

9.Complete the fourth and final strand by connecting the components together in the following order: 5 - 6mm Black Faceted Connectors; 1 -8mm Black Faceted Connector; 1 - 10mm Black Faceted Connector; Beaded Chain Unit from Step 8; 1 - 10mm Black Faceted Connector; 1 - 8mm Black Faceted Connector and 15 - 6mm Black Faceted Connectors.

10.Connect the fourth strand to outer clasp loops by opening bead loops with pliers and closing after connection.



PRODUCTS USED