Catalogs FAQ



Difficulty Level
Share |
Global Nomad™ Ceramic Necklace & Earrings

Instructions:

NECKLACE:

*The finished necklace length is approximately 18”

1. Start Necklace by creating the pendant by stringing on 8-Black E-Beads onto 1-2” Antique Gold Head Pin. Finish with a simple loop and the Simple Loop Technique. Repeat this process 8 more times to create a total of 9 beaded head pins. Attach these 8 beaded head pins to loops 1-4 and 8-12 of the Gold Crescent Pendant.

2. Create 3 more beaded head pins using Black E-Beads and 2” Antique Gold Head Pins. String on 9-Black E-Beads onto 2-Head Pins and finish with a simple loop and the simple loop technique. Attach these beaded head pins to loops 5 & 7. Create your final beaded headpin by stringing on 11-Black E-Beads onto 1-Head Pin and finishing with a simple loop. Attach this head pin to loop 6 of the Gold Crescent Pendant.

3. Create one side of your necklace. Separate 1-7 link piece of Large Gold Link Chain. Attach one end of the chain to one side of 1-Antique Gold Toggle Clasp with 1-6mm Antique Gold Jump Ring and the Jump Ring Technique. Add 1-6mm Antique Gold Jump Ring to the other end of the chain.

4. Cut 1-8” length of Gold Tiger Tail. Attach one end of the Tiger Tail to the Jump Ring in Step 3 with 1-Antique Gold Crimp Bead and the Crimping Technique.

5. String on 1-Black Ceramic Round Bead and 1-Red Ceramic Oval Bead. Repeat this 3 more times. Finish with 1-Black Ceramic Round Bead.

6. Attach the beaded Tiger Tail to the Gold Crescent Pendant with 1-Antique Gold Crimp Bead and the Crimping Technique.

7. Repeat Steps 3-6 to complete the second side of the necklace.

EARRINGS:

1. String on 1-Red Ceramic Oval Bead and 1-Black Ceramic Round Bead onto 1-2” Antique Gold Eye Pin. Finish with a Simple Loop and the Simple Loop Technique.

2. Attach this beaded eye pin to the bar side of 1-Antique Gold Toggle Clasp by opening and closing the top loop of the eye pin around the bar and through the hole of the bar clasp.

3. Attach 1-Antique Gold Earring Finding to the hole of the bar clasp by opening and closing the loop of the Earring Finding.

4. Repeat Steps 1-3 to complete the second earring.

Materials:
1 pc – Gold Crescent Pendant (1 pkg: BM13865)

10 pc – Red Ceramic Oval Beads (2 strands: BM13845)

12 pc – Black Ceramic Round Beads (2 strands: BM13845)

14 links – Antique Gold Large Link Chain (1 pkg: BM13826)

3 pc – Antique Gold Toggle Clasp (1 pkg: BM14025)

1 hank – Black E-Beads (1 hank: BM13974)

4 pc – 6mm Antique Gold Jump Rings (1 pkg: BM14033)

2 pc – 2” Antique Gold Eye Pins (1 pkg: BM11123)

12 pc – 2” Antique Gold Head Pins (1 pkg: BM11141)

4 pc – Antique Gold Crimp Beads (1 pkg: BM11133)

2 pc – Antique Gold Earring Findings (1 pkg: BM11114)

16” - Gold Tiger Tail



PRODUCTS USED