Catalogs FAQ



Difficulty Level
Share |
Frosting™ Crystals and Filigree Necklace

Instructions:

*The finished necklace length is approximately 52”

1.Begin the necklace by creating six 4mm Light Grey Pearls connectors using 1” Silver Eye Pins. Slide 1-4mm Light Grey Round Pearl onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

2. Create six crystal connectors using the same technique: 2–6mm Bicones, 1–6mm Round Crystal, 1–8mm Bicone Crystal, 2–8mm Round Crystals.

3.Connect all 12 connectors from steps 1-2 together into a beaded chain to create one necklace pattern, as:
1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-6mm Round Crystal, 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-8mm Round Crystal, 1-4mm Pearl, 1-8mm Bicone Crystal, 1-4mm Pearl, 1-8mm Round Crystal.

4. Repeat all above steps 6 additional times, repeating the pattern.

5.Create and attach additional beaded connectors as: 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-6mm Round Crystal, 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl.

6.Attach each ending 4mm Light Grey Pearl connector to the small Silver Filigree Connector.

7. Continue to make each end of beaded necklace chain as:
1-4mm Pearl, 1-6mm Round Crystal, 1-4mm Pearl for the one end.
1-4mm Pearl, 1-8mm Round Crystal, 1-4mm Pearl, 1-8mm Bicone Crystal, 1-4mm Pearl, 1-8mm Round Crystal, 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl for the second end.

8. Attach each ending 4mm Light Grey Pearl connector to the big Silver Filigree Connector’s adjacent loops.

9.Begin to create and attach dangles to directly across adjacent loops of Big Silver Filigree Connector.

10.To make a first necklace dangle, create and attach connectors as: 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-8mm Round Crystal, 1-4mm Pearl, 1-Small Silver Filigree Connector, 1-4mm Pearl, 1-6mm Round Crystal, 1-4mm Pearl, 1-Small Silver Filigree Connector.

11. To create a second necklace dangle, create and attach connectors as: 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-6mm Round Crystal, 1-4mm Pearl, 1-8mm Bicone Crystal, 1-8mm Bicone Crystal, 1-4mm Pearl, 1-6mm Bicone Crystal, 1-4mm Pearl, 1-8mm Round Crystal, 1-4mm Pearl, 1-Big Silver Filigree Connector.

Faceted Grey Crystals and Silver Filigree Connectors Earrings

1. Create 1-6mm Round Crystal Connector, using a Silver Eye Pin.
2. Create 2-6mm Bicone Crystal dangles, using Silver Head Pins.
3. Create 1-6mm Round Crystal dangle, using a Silver Head Pin.
4. Attach 2-5mm Silver Jump Rings to the two Big Silver Filigree adjacent loops.
5. Repeat step 4 just directly across from the top.
6. Attach 1-6mm Round Crystal connector to the one pair of 5mm Jump Rings from the previous step on the one side and to a Silver Ear Wire on the other.
7. Attach 1-6mm Round Crystal dangle to the opposite pair of Jump Rings.
8. Attach 2-6mm Bicone dangles to the next loops of Big Silver Filigree on the both sides of 6mm Round Crystal dangle.

MATERIALS:

8pc/2 pkg - Silver Filigree Pendants BM12980
17pc/1 pkg - 8mm Clear/Silver Round Crystals BM12810
15pc/2 pkg - 6mm Clear/Silver Round Crystals BM12810
10pc/2 pkg - 8mm Clear/Silver Bicones BM12804
24pc/2 pkg - 6mm Clear/Silver Bicones BM12804
64pc/1 pkg - 4mm Light Grey Glass Pearls BM12646
6pc/1 pkg - 2" Silver Head Pins
122pc/2 pkg - Silver Eye Pins Asst
8pc/1 pkg - 5mm Silver Jump Rings
2pc/1 pkg - Silver Ear Hooks



PRODUCTS USED