Catalogs FAQ



Difficulty Level
Share |
Frosting™ Pink Briolettes with Pearls

Instructions:

*The finished necklace length is approximately 19”

1.Begin the necklace by creating 18 - 6mm White Glass Pearl connectors using 1” Silver Eye Pins. Slide 1-6mm White Glass Pearl onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

2. Create 18-6mm Pink Glass Bicone Connectors using 1” Silver Eye Pins. Slide 1-6mm Pink Glass Bicone onto a Silver Eye Pins. Make a plain loop using Basic Loop Technique.

3.Connect all 36 connectors together into a beaded chain, alternating one pearl connector and one crystal.

4.Attach Silver Lobster Clasp to ending pearl connector.

5.Repeat all above steps to create a second necklace strand.

6.To create 8mm White Glass Pearl connector slide 1-8mm White Glass Pearl onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

7.Attach Pink Glass Bicone connectors, ending two necklace strands to the top loop of 8mm White Glass Pearl connector.

8. Create 1-6mm Pink Glass Bicone connector using 1” Silver Eye Pins. Slide 1-6mm Pink Glass Bicone onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

9.Attach this 6mm Pink Glass Bicone connector to the bottom loop of 8mm White Glass Pearl connector from step 6.

10. Create one 8mm Pink Glass Bicone connector using a 2” Silver Eye Pin. Slide 1-8mm Pink Glass Bicone onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

11.Attach this 8mm Pink Glass Bicone connector to the bottom loop of 6mm Pink Glass Bicone connector from steps 8-9.

12.To finish the necklace, create one Pink Glass Briolette dangle using Basic Briolette Wrapping Technique.

13. Attach this dangle to the bottom loop of 8mm Pink Glass Bicone connector from steps 10-11.

Pink Glass Crystals and White Glass Pearls Bracelet:
*The finished bracelet length is approximately 8 ½”

1.Begin the bracelet by creating 7-8mm White Glass Pearl connectors using 2” Silver Eye Pins. Slide 1-8mm White Glass Pearl onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

2. Create 7-8mm Pink Glass Bicone connectors using 2” Silver Eye Pins. Slide 8mm Pink Glass Bicone onto a Silver Eye Pin. Make a plain loop using Basic Loop Technique.

3.Connect all 14 connectors together into a beaded chain, alternating one pearl connector and one glass crystal.

4.Attach Silver Lobster Clasp to ending glass crystal connector and Silver Lobster Clasp bar to the pearl one.

5.Create one more 8mm White Glass Pearl connector as described above.

6.Attach this connector to the Silver Lobster Clasp loop.

7. To finish a bracelet create one Pink Glass Briolette dangle using Basic Briolette Wrapping Technique.

8. Attach this dangle to the bottom loop of 8mm White Glass Pearl connector from steps 5-6.

Pink Glass Crystals and White Glass Pearls Earrings:
*The finished earrings length is approximately 2 ½”

1.To make an earring create 1-6mm Pink Glass Bicone and 1-6mm White Glass Pearl connector as described above.

2.Create one Pink Glass Briolette dangle using Basic Briolette Wrapping Technique.

3. Connect all earring parts together in the order:
Silver Ear Wire, 1-6mm Pink Glass Bicone connector, 1-6mm White Glass Pearl connector, 1-Pink Glass Briolette.

4. Repeat steps 1-3 to create a second earring.

MATERIALS USED:

2 pkg - 6mm Pink Glass Bicones BM12675
1 pkg - 8mm Pink Glass Bicones BM12675
1 pkg - 6mm White Glass Pearls BM12638
1 pkg - 8mm White Glass Pearls BM12638
1 pkg - Pink Glass Briolette BM12690
12" - 24 Ga Silver Wire (4 x 3")
1 pkg - Silver Lobster Clasp
2 - Silver Ear Wire
1 pkg - Silver Eye Pins Asst



PRODUCTS USED